new package

chrony/chrony.conf

@@ -0,0 +1,15 @@
+##
+##  chrony.conf -- Chrony Configuration
+##
+
+keyfile    @l_prefix@/etc/chrony/chrony.keys
+driftfile  @l_prefix@/var/chrony/run/chrony.drift
+logdir     @l_prefix@/var/chrony/log/
+
+pool       pool.ntp.org iburst
+makestep   1.0 3
+rtcsync
+
+allow      192.168.0.0/16 10.0.0.0/8
+log        measurements statistics tracking
+

chrony/chrony.spec

@@ -0,0 +1,138 @@
+##
+##  chrony.spec -- OpenPKG RPM Package Specification
+##  Copyright (c) 2000-2017 OpenPKG Foundation e.V. <http://openpkg.net/>
+##
+##  Permission to use, copy, modify, and distribute this software for
+##  any purpose with or without fee is hereby granted, provided that
+##  the above copyright notice and this permission notice appear in all
+##  copies.
+##
+##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+##  SUCH DAMAGE.
+##
+
+#   package information
+Name:         chrony
+Summary:      Network Time Protocol (NTP) Server
+URL:          https://chrony.tuxfamily.org/
+Vendor:       Richard P. Curnow, Miroslav Lichva
+Packager:     OpenPKG Foundation e.V.
+Distribution: OpenPKG Community
+Class:        EVAL
+Group:        Networking
+License:      GPL
+Version:      3.2
+Release:      20170924
+
+#   list of sources
+Source0:      https://download.tuxfamily.org/chrony/chrony-%{version}.tar.gz
+Source1:      rc.chrony
+Source2:      chrony.conf
+
+#   build information
+BuildPreReq:  OpenPKG, openpkg >= 20160101
+PreReq:       OpenPKG, openpkg >= 20160101
+BuildPreReq:  ncurses, readline
+PreReq:       ncurses, readline
+
+%description
+    Chrony is a versatile implementation of the Network Time Protocol
+    (NTP). It can synchronise the system clock with NTP servers,
+    reference clocks (e.g. GPS receiver), and manual input using
+    wristwatch and keyboard. It can also operate as an NTPv4 (RFC 5905)
+    server and peer to provide a time service to other computers in the
+    network.
+
+%track
+    prog chrony = {
+        version   = %{version}
+        url       = https://chrony.tuxfamily.org/download.html
+        regex     = chrony-(__VER__)\.tar\.gz
+    }
+
+%prep
+    %setup -q
+
+%build
+    #   configure program
+    CC="%{l_cc}" \
+    CFLAGS="%{l_cflags -O}" \
+    CPPFLAGS="%{l_cppflags}" \
+    LDFLAGS="%{l_ldflags}" \
+    ./configure \
+        --prefix=%{l_prefix} \
+        --mandir=%{l_prefix}/man \
+        --sysconfdir=%{l_prefix}/etc/chrony \
+        --localstatedir=%{l_prefix}/var/chrony \
+        --chronyrundir=%{l_prefix}/var/chrony/run \
+        --chronyvardir=%{l_prefix}/var/chrony/run \
+        --with-pidfile=%{l_prefix}/var/chrony/run/chrony.pid \
+        --with-sendmail=%{l_prefix}/sbin/sendmail \
+        --enable-readline \
+        --with-readline \
+        --without-editline \
+        --with-readline-includes=%{l_prefix}/include \
+        --with-readline-library=%{l_prefix}/lib \
+        --with-ncurses-library=%{l_prefix}/lib
+
+    #   build program
+    %{l_make} %{l_mflags -O}
+
+%install
+    #   install program
+    %{l_make} %{l_mflags} install DESTDIR=$RPM_BUILD_ROOT
+
+    #   strip down installation
+    strip $RPM_BUILD_ROOT%{l_prefix}/bin/* >/dev/null 2>&1 || true
+
+    #   install default configuration
+    %{l_shtool} mkdir -f -p -m 755 \
+        $RPM_BUILD_ROOT%{l_prefix}/etc/chrony
+    %{l_shtool} install -c -m 644 %{l_value -s -a} \
+        %{SOURCE chrony.conf} $RPM_BUILD_ROOT%{l_prefix}/etc/chrony/
+
+    #   install run-command script
+    %{l_shtool} mkdir -f -p -m 755 \
+        $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
+    %{l_shtool} install -c -m 755 %{l_value -s -a} \
+        %{SOURCE rc.chrony} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
+
+    #   create run-time directories
+    %{l_shtool} mkdir -f -p -m 755 \
+        $RPM_BUILD_ROOT%{l_prefix}/var/chrony/run \
+        $RPM_BUILD_ROOT%{l_prefix}/var/chrony/log
+
+    #   determine installation files
+    %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
+        %{l_files_std} \
+        '%config %{l_prefix}/etc/chrony/chrony.conf' \
+        '%attr(-,%{l_nusr},%{l_ngrp}) %{l_prefix}/var/chrony/*'
+
+%files -f files
+
+%clean
+
+%post
+    #   after upgrade, restart service
+    [ $1 -eq 2 ] || exit 0
+    eval `%{l_rc} chrony status 2>/dev/null`
+    [ ".$chrony_active" = .yes ] && %{l_rc} chrony restart
+    exit 0
+
+%preun
+    #   before erase, stop service and remove log files
+    [ $1 -eq 0 ] || exit 0
+    %{l_rc} chrony stop 2>/dev/null
+    rm -f $RPM_INSTALL_PREFIX/var/chrony/* >/dev/null 2>&1 || true
+    exit 0
+

chrony/rc.chrony

@@ -0,0 +1,101 @@
+#!@l_prefix@/bin/openpkg rc
+##
+##  rc.chrony -- Run-Commands
+##
+
+%config
+    chrony_enable="$openpkg_rc_def"
+    chrony_mode="daemon"
+    chrony_daemon_flags=""
+    chrony_log_prolog="true"
+    chrony_log_epilog="true"
+    chrony_log_numfiles="10"
+    chrony_log_minsize="1M"
+    chrony_log_complevel="9"
+
+%common
+    chrony_pidfile="@l_prefix@/var/chrony/run/chrony.pid"
+    chrony_signal () {
+        [ -f $chrony_pidfile ] && kill -$1 `cat $chrony_pidfile`
+    }
+    chrony_once () {
+        [ ".$1" != . ] && sleep $1
+        @l_prefix@/sbin/chronyd -q
+    }
+
+%status -u @l_susr@ -o
+    chrony_usable="unknown"
+    chrony_active="no"
+    rcService chrony enable yes && \
+    [ ".$chrony_mode" = ".daemon" ] && \
+        chrony_signal 0 && chrony_active="yes"
+    echo "chrony_enable=\"$chrony_enable\""
+    echo "chrony_usable=\"$chrony_usable\""
+    echo "chrony_active=\"$chrony_active\""
+
+%start -p 200 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    rcService chrony active yes && exit 0
+
+    #   under both periodical and daemon mode, synchronize local machine
+    #   once manually -- either to fill the gap between startup time and
+    #   the first run of the cron jobs (periodical mode) or to perform
+    #   a possible large time offset which chronyd does not perform itself
+    #   (daemon mode).
+    case "$chrony_mode" in
+        once | \
+        daemon | \
+        quarterly | hourly | daily | weekly | monthly )
+            chrony_once
+            ;;
+    esac
+
+    #   run the NTP daemon for continued synchronization
+    if [ ".$chrony_mode" = .daemon ]; then
+        @l_prefix@/sbin/chronyd \
+            -u @l_nusr@ \
+            ${chrony_daemon_flags}
+    fi
+
+%stop -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    rcService chrony active no  && exit 0
+    chrony_signal TERM
+    rm -f $chrony_pidfile 2>/dev/null || true
+
+%restart -p 200 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    rcService chrony active no  && exit 0
+    rc chrony stop start
+
+%quarterly -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    [ ".$chrony_mode" = .quarterly ] && chrony_once 30
+    exit 0
+
+%hourly -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    [ ".$chrony_mode" = .hourly ] && chrony_once 30
+    exit 0
+
+%daily -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    [ ".$chrony_mode" = .daily ] && chrony_once 30
+    shtool rotate -f \
+        -n ${chrony_log_numfiles} -s ${chrony_log_minsize} -d \
+        -z ${chrony_log_complevel} -m 644 -o @l_susr@ -g @l_mgrp@ \
+        -P "${chrony_log_prolog}" \
+        -E "${chrony_log_epilog}; rc chrony restart" \
+        @l_prefix@/var/chrony/log/chrony.log
+    exit 0
+
+%weekly -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    [ ".$chrony_mode" = .weekly ] && chrony_once 30
+    exit 0
+
+%monthly -p 800 -u @l_susr@
+    rcService chrony enable yes || exit 0
+    [ ".$chrony_mode" = .monthly ] && chrony_once 30
+    exit 0
+