new package: postgresql8 8.0.0b4 (PostgreSQL Database)

postgresql8/pg_migrate

@@ -0,0 +1,202 @@
+#!/bin/sh
+##
+##  pg_migrate -- PostgreSQL Database Migration Utility
+##  Copyright (c) 2000-2003 The OpenPKG Project <http://www.openpkg.org/>
+##  Copyright (c) 2000-2003 Ralf S. Engelschall <rse@engelschall.com>
+##  Copyright (c) 2000-2003 Cable & Wireless <http://www.cw.com/>
+##
+##  Permission to use, copy, modify, and distribute this software for
+##  any purpose with or without fee is hereby granted, provided that
+##  the above copyright notice and this permission notice appear in all
+##  copies.
+##
+##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+##  SUCH DAMAGE.
+##
+
+#   configuration
+l_prefix="@l_prefix@"
+l_rusr="@l_rusr@"
+l_rgrp="@l_rgrp@"
+l_pguser="@l_pguser@"
+l_pgpass="@l_pgpass@"
+
+#   establish sane environment
+LC_CTYPE=C
+export LC_CTYPE
+umask 022
+
+#   check command line
+if [ $# -ne 1 ]; then
+    echo "$0:ERROR: invalid command line" 1>&2
+    echo "$0:USAGE: $0 dump|restore" 1>&2
+    exit 1
+fi
+
+#   dispatch into commands
+cmd="$1"
+shift
+case $cmd in
+    dump )
+        echo "++ enforcing full-superuser access policy"
+        cp -p $l_prefix/var/postgresql/db/pg_hba.conf \
+              $l_prefix/var/postgresql/db/pg_hba.conf.orig
+        ( echo "local all trust"
+          echo "host all 127.0.0.1 255.255.255.255 trust"
+        ) >$l_prefix/var/postgresql/db/pg_hba.conf
+
+        if [ ".`$l_prefix/etc/rc postgresql status 2>&1 | grep 'is running'`" != . ]; then
+            echo "++ reloading already running database engine"
+            $l_prefix/etc/rc postgresql reload
+            sleep 2
+            epilog=reload
+        else
+            echo "++ temporarily starting database engine"
+            $l_prefix/etc/rc postgresql start 
+            sleep 4
+            epilog=stop
+        fi
+
+        echo "++ rotating dump files $l_prefix/var/postgresql/db.dump*.sql.bz2"
+        i=9
+        rm -f $l_prefix/var/postgresql/db.dump.$i.sql.bz2 >/dev/null 2>&1 || true
+        while [ $i -gt 0 ]; do
+            j=$i
+            i=`expr $i - 1`
+            if [ $i -eq 0 ]; then
+                prev="$l_prefix/var/postgresql/db.dump.sql.bz2"
+                next="$l_prefix/var/postgresql/db.dump.$j.sql.bz2"
+            else
+                prev="$l_prefix/var/postgresql/db.dump.$i.sql.bz2"
+                next="$l_prefix/var/postgresql/db.dump.$j.sql.bz2"
+            fi
+            if [ -f $prev ]; then
+                mv $prev $next
+            fi
+        done
+
+        echo "++ dumping all databases into $l_prefix/var/postgresql/db.dump.sql.bz2"
+        PGPASSWORD="$l_pgpass" \
+        $l_prefix/bin/pg_dumpall \
+            -U $l_pguser -o |\
+            $l_prefix/lib/openpkg/bzip2 -9 \
+                >$l_prefix/var/postgresql/db.dump.sql.bz2
+        chown ${l_rusr}:${l_rgrp} $l_prefix/var/postgresql/db.dump.sql.bz2
+        chmod 700 $l_prefix/var/postgresql/db.dump.sql.bz2
+
+        echo "++ restoring original access policy"
+        cp -p $l_prefix/var/postgresql/db/pg_hba.conf.orig \
+              $l_prefix/var/postgresql/db/pg_hba.conf
+        rm -f $l_prefix/var/postgresql/db/pg_hba.conf.orig
+
+        if [ ".$epilog" = .reload ]; then
+            echo "++ reloading already running database engine (again)"
+            $l_prefix/etc/rc postgresql reload
+            sleep 2
+        else
+            echo "++ stopping temporarily started database engine"
+            $l_prefix/etc/rc postgresql stop 
+            sleep 4
+        fi
+        ;;
+
+    restore )
+        if [ ".`$l_prefix/etc/rc postgresql status 2>&1 | grep 'is running'`" != . ]; then
+            echo "++ stopping already running database engine"
+            $l_prefix/etc/rc postgresql stop
+            sleep 2
+            epilog=start
+        else
+            epilog=none
+        fi
+
+        echo "++ rotating database directories $l_prefix/var/postgresql/db.old*/"
+        i=9
+        rm -rf $l_prefix/var/postgresql/db.old.$i >/dev/null 2>&1 || true
+        while [ $i -gt 0 ]; do
+            j=$i
+            i=`expr $i - 1`
+            if [ $i -eq 0 ]; then
+                prev="$l_prefix/var/postgresql/db"
+                next="$l_prefix/var/postgresql/db.old.$j"
+            else
+                prev="$l_prefix/var/postgresql/db.old.$i"
+                next="$l_prefix/var/postgresql/db.old.$j"
+            fi
+            if [ -d $prev ]; then
+                mv $prev $next
+            fi
+        done
+
+        echo "++ creating new database directory $l_prefix/var/postgresql/db/"
+        mkdir $l_prefix/var/postgresql/db
+        chown ${l_rusr}:${l_rgrp} $l_prefix/var/postgresql/db
+        chmod 700 $l_prefix/var/postgresql/db
+
+        su - ${l_rusr} -c \
+            "LC_CTYPE=C; export LC_CTYPE; umask 022; \
+            (echo $l_pguser; echo $l_pgpass) |\
+            $l_prefix/bin/pg_initdb -U $l_pguser -W -D $l_prefix/var/postgresql/db" 2>&1 |\
+                $l_prefix/lib/openpkg/shtool prop \
+                    -p "++ creating new database data"
+
+        echo "++ restoring database configurations"
+        for conf in pg_hba.conf pg_ident.conf postgresql.conf; do
+            cp -p $l_prefix/var/postgresql/db.old.1/$conf \
+                  $l_prefix/var/postgresql/db/
+        done
+
+        echo "++ enforcing full-superuser access policy"
+        cp -p $l_prefix/var/postgresql/db/pg_hba.conf \
+              $l_prefix/var/postgresql/db/pg_hba.conf.orig
+        ( echo "local all trust"
+          echo "host all 127.0.0.1 255.255.255.255 trust"
+        ) >$l_prefix/var/postgresql/db/pg_hba.conf
+
+        if [ ".$epilog" = .start ]; then
+            echo "++ starting database engine"
+        else
+            echo "++ temporarily starting database engine"
+        fi
+        $l_prefix/etc/rc postgresql start
+        sleep 4
+
+        echo "++ restoring all databases from $l_prefix/var/postgresql/db.dump.sql.bz2"
+        $l_prefix/lib/openpkg/bzip2 -c -d \
+            $l_prefix/var/postgresql/db.dump.sql.bz2 |\
+                $l_prefix/bin/psql -U $l_pguser -d template1 2>&1 |\
+                    tee $l_prefix/var/postgresql/db.log |\
+                        $l_prefix/lib/openpkg/shtool prop \
+                            -p "++ restoring data (see $l_prefix/var/postgresql/db.log)"
+
+        echo "++ restoring original access policy"
+        cp -p $l_prefix/var/postgresql/db/pg_hba.conf.orig \
+              $l_prefix/var/postgresql/db/pg_hba.conf
+        rm -f $l_prefix/var/postgresql/db/pg_hba.conf.orig
+
+        if [ ".$epilog" = .start ]; then
+            echo "++ reloading already running database engine"
+            $l_prefix/etc/rc postgresql reload
+            sleep 2
+        else
+            echo "++ stopping temporarily started database engine"
+            $l_prefix/etc/rc postgresql stop 
+            sleep 4
+        fi
+        ;;
+    * )
+        echo "$0:ERROR: unknown command \"$cmd\"" 1>&2
+        exit 1
+        ;;
+esac
+

postgresql8/postgresql8.patch

@@ -0,0 +1,47 @@
+Remove lorder(1) and tsort(1) stuff, because it is not needed on modern
+systems and makes problems under some platforms (e.g. older Linux).
+
+--- src/Makefile.global.in.orig	Thu Sep  5 00:54:18 2002
++++ src/Makefile.global.in	Tue Jul  1 17:17:25 2003
+@@ -193,7 +193,7 @@
+ LDREL = -r
+ LDOUT = -o
+ RANLIB = @RANLIB@
+-LORDER = @LORDER@
++MK_NO_LORDER= true
+ X = @EXEEXT@
+ 
+ # Perl 
+--- src/makefiles/Makefile.freebsd.orig	Wed Aug 29 21:14:40 2001
++++ src/makefiles/Makefile.freebsd	Tue Jul  1 17:23:00 2003
+@@ -16,7 +16,7 @@
+ 	$(LD) $(LDREL) $(LDOUT) $<.obj -x $<
+ 	@echo building shared object $@
+ 	@rm -f $@.pic
+-	@${AR} cq $@.pic `lorder $<.obj | tsort`
++	@${AR} cq $@.pic
+ 	${RANLIB} $@.pic
+ 	@rm -f $@
+ 	$(LD) -x -Bshareable -Bforcearchive -o $@ $@.pic
+--- src/makefiles/Makefile.openbsd.orig	Wed Aug 29 21:14:40 2001
++++ src/makefiles/Makefile.openbsd	Tue Jul  1 17:23:12 2003
+@@ -16,7 +16,7 @@
+ 	$(LD) $(LDREL) $(LDOUT) $<.obj -x $<
+ 	@echo building shared object $@
+ 	@rm -f $@.pic
+-	@${AR} cq $@.pic `lorder $<.obj | tsort`
++	@${AR} cq $@.pic
+ 	${RANLIB} $@.pic
+ 	@rm -f $@
+ 	$(LD) -x -Bshareable -Bforcearchive \
+--- src/makefiles/Makefile.netbsd.orig	Wed Aug 29 21:14:40 2001
++++ src/makefiles/Makefile.netbsd	Tue Jul  1 17:23:39 2003
+@@ -18,7 +18,7 @@
+ 	$(LD) $(LDREL) $(LDOUT) $<.obj -x $<
+ 	@echo building shared object $@
+ 	@rm -f $@.pic
+-	@${AR} cq $@.pic `lorder $<.obj | tsort`
++	@${AR} cq $@.pic
+ 	${RANLIB} $@.pic
+ 	@rm -f $@
+ 	$(LD) -x -Bshareable -Bforcearchive \

postgresql8/postgresql8.spec

@@ -0,0 +1,616 @@
+##
+##  postgresql8.spec -- OpenPKG RPM Specification
+##  Copyright (c) 2000-2004 The OpenPKG Project <http://www.openpkg.org/>
+##  Copyright (c) 2000-2004 Ralf S. Engelschall <rse@engelschall.com>
+##  Copyright (c) 2000-2004 Cable & Wireless <http://www.cw.com/>
+##
+##  Permission to use, copy, modify, and distribute this software for
+##  any purpose with or without fee is hereby granted, provided that
+##  the above copyright notice and this permission notice appear in all
+##  copies.
+##
+##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
+##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
+##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+##  SUCH DAMAGE.
+##
+
+#   package versions
+%define       V_postgresql      8.0.0
+%define       V_postgresql_beta 4
+%define       V_libpqpp         4.0
+%define       V_libpqxx         2.4.0
+%define       V_pgperl          2.0.2
+%define       V_psqlodbc        07.03.0200
+%define       V_slony1          1.0.5
+%define       V_pgpool          2.2.1
+
+#   package information
+Name:         postgresql8
+Summary:      PostgreSQL Database
+URL:          http://www.postgresql.org/
+Vendor:       PostgreSQL Group
+Packager:     The OpenPKG Project
+Distribution: OpenPKG
+Class:        BASE
+Group:        Database
+License:      GPL
+Version:      %{V_postgresql}b%{V_postgresql_beta}
+Release:      20041029
+
+#   package options
+%option       with_server   yes
+%option       with_cxx      no
+%option       with_perl     no
+%option       with_odbc     no
+%option       with_compat   no
+%option       with_tcl      no
+%option       with_slony1   no
+%option       with_pgpool   no
+
+#   list of sources
+Source0:      ftp://ftp.postgresql.org/pub/source/v%{V_postgresql}beta/postgresql-%{V_postgresql}beta%{V_postgresql_beta}.tar.bz2
+Source1:      ftp://gborg.postgresql.org/pub/libpqpp/stable/libpq++-%{V_libpqpp}.tar.gz
+Source2:      ftp://gborg.postgresql.org/pub/libpqxx/stable/libpqxx-%{V_libpqxx}.tar.gz
+Source3:      ftp://gborg.postgresql.org/pub/pgperl/stable/pgperl-%{V_pgperl}.tar.gz
+Source4:      ftp://ftp.us.postgresql.org/odbc/versions/src/psqlodbc-%{V_psqlodbc}.tar.gz
+Source5:      http://developer.postgresql.org/~wieck/slony1/download/slony1-%{V_slony1}.tar.gz
+Source6:      http://www2b.biglobe.ne.jp/~caco/pgpool/pgpool-%{V_pgpool}.tar.gz
+Source7:      rc.postgresql
+Source8:      pg_migrate
+Patch0:       postgresql8.patch
+
+#   build information
+Prefix:       %{l_prefix}
+BuildRoot:    %{l_buildroot}
+BuildPreReq:  OpenPKG, openpkg >= 20040130, make, gcc, flex, bison, bison::with_beta = yes, gzip
+PreReq:       OpenPKG, openpkg >= 20040130
+BuildPreReq:  readline, zlib, openssl, getopt
+PreReq:       readline, zlib, openssl, getopt
+%if "%{with_perl}" == "yes"
+BuildPreReq:  perl, perl-openpkg >= 5.8.3-20040126
+PreReq:       perl, perl-openpkg >= 5.8.3-20040126
+%endif
+%if "%{with_odbc}" == "yes"
+BuildPreReq:  unixodbc
+PreReq:       unixodbc
+%endif
+%if "%{with_tcl}" == "yes"
+BuildPreReq:  tcl, tcl::with_x11 = yes, X11
+PreReq:       tcl, tcl::with_x11 = yes, X11
+%endif
+AutoReq:      no
+AutoReqProv:  no
+Provides:     postgresql = %{version}
+
+%description
+    PostgreSQL is a sophisticated Object-Relational DBMS, supporting
+    almost all SQL constructs, including subselects, transactions,
+    and user-defined types and functions. It is the most advanced
+    open-source database available anywhere.
+
+%track
+    prog postgresql = {
+        version   = %{V_postgresql}
+        url       = ftp://ftp.postgresql.org/pub/source/
+        regex     = v(8\.\d+(\.\d+)*)(?!beta)
+        url       = ftp://ftp.postgresql.org/pub/source/v__NEWVER__/
+        regex     = postgresql-(\d+\.\d+(\.\d+)*)\.tar\.(?:gz|bz2)
+    }
+    prog postgresql:libpq++ = {
+        version   = %{V_libpqpp}
+        url       = ftp://gborg.postgresql.org/pub/libpqpp/stable/
+        regex     = libpq\+\+-(__VER__)\.tar\.gz
+    }
+    prog postgresql:libpqxx = {
+        version   = %{V_libpqxx}
+        url       = ftp://gborg.postgresql.org/pub/libpqxx/stable/
+        regex     = libpqxx-(__VER__)\.tar\.gz
+    }
+    prog postgresql:pgperl = {
+        version   = %{V_pgperl}
+        url       = ftp://gborg.postgresql.org/pub/pgperl/stable/
+        regex     = pgperl-(__VER__)\.tar\.gz
+    }
+    prog postgresql:psqlodbc = {
+        version   = %{V_psqlodbc}
+        url       = ftp://ftp.postgresql.org/pub/odbc/versions/src/
+        regex     = psqlodbc-(\d{2}\.\d{2}\.\d{4})\.tar\.gz
+    }
+    prog postgresql:slony1 = {
+        version   = %{V_slony1}
+        url       = http://developer.postgresql.org/~wieck/slony1/download/
+        regex     = slony1-(__VER__)\.tar\.gz
+    }
+    prog postgresql:pgpool = {
+        version   = %{V_pgpool}
+        url       = http://www2b.biglobe.ne.jp/~caco/pgpool/
+        regex     = pgpool-(__VER__)\.tar\.gz
+    }
+
+%prep
+    %setup -q -n postgresql-%{V_postgresql}beta%{V_postgresql_beta}
+    %patch -p0
+%if "%{with_cxx}" == "yes"
+    %setup -q -T -D -a 1
+    %setup -q -T -D -a 2
+%endif
+%if "%{with_perl}" == "yes"
+    %setup -q -T -D -a 3
+%endif
+%if "%{with_odbc}" == "yes"
+    %setup -q -T -D -a 4
+%endif
+%if "%{with_slony1}" == "yes"
+    %setup -q -T -D -a 5
+%endif
+%if "%{with_pgpool}" == "yes"
+    %setup -q -T -D -a 6
+%endif
+
+    #   adjust source tree
+    %{l_shtool} subst \
+        -e 's;\(#define.*DEFAULT_PGSOCKET_DIR[^"]*"\)/tmp\("\);\1%{l_prefix}/var/postgresql/run\2;' \
+        src/include/pg_config_manual.h
+    %{l_shtool} subst \
+        -e 's;^\(sqlmansect *=\).*$;\1 7;' \
+        src/makefiles/Makefile.solaris
+    %{l_shtool} subst \
+        -e 's;$(INSTALL_SHLIB);#$(INSTALL_SHLIB);g' \
+        src/backend/utils/mb/conversion_procs/proc.mk
+    %{l_shtool} subst \
+        -e 's;# Shared library stuff;enable_shared = yes;g' \
+        src/pl/plpgsql/src/Makefile
+
+%build
+    rm -rf $RPM_BUILD_ROOT
+
+    #   configure package
+    CC="%{l_cc}" \
+%if "%{with_slony1}" == "yes"
+    CFLAGS="%{l_cflags -O} -pthread" \
+%else
+    CFLAGS="%{l_cflags -O}" \
+%endif
+%if "%{with_tcl}" == "yes"
+    CPPFLAGS="%{l_cppflags tcl} -DOPENSSL_DISABLE_OLD_DES_SUPPORT" \
+    LDFLAGS="%{l_ldflags} -L`%{l_rc} --query x11_libdir`" \
+%else
+    CPPFLAGS="%{l_cppflags} -DOPENSSL_DISABLE_OLD_DES_SUPPORT" \
+    LDFLAGS="%{l_ldflags}" \
+%endif
+    TAR="%{l_tar}" \
+    YACC="bison-beta -y" \
+    ./configure \
+        --cache-file=./config.cache \
+        --prefix=%{l_prefix} \
+        --includedir=%{l_prefix}/include/postgresql \
+        --with-openssl \
+        --with-readline \
+        --with-zlib \
+%if "%{with_tcl}" == "yes"
+        --with-tcl \
+        --with-tclconfig="%{l_prefix}/lib" \
+        --with-tkconfig="%{l_prefix}/lib" \
+%endif
+%if "%{with_slony1}" == "yes"
+        --enable-thread-safety \
+%endif
+        --disable-syslog \
+        --disable-shared
+
+    #   build package
+    %{l_make} %{l_mflags}
+
+    #   build C++ bindings (both old and new one)
+%if "%{with_cxx}" == "yes"
+    ( cd libpq++-%{V_libpqpp}
+      CXX="%{l_cxx}"
+      CFLAGS="%{l_cflags -O}"
+      CPPFLAGS="-DHAVE_NAMESPACE_STD -DHAVE_CXX_STRING_HEADER -DDLLIMPORT= "
+      CPPFLAGS="$CPPFLAGS -I. -I../src/interfaces/libpq -I../src/interfaces"
+      CPPFLAGS="$CPPFLAGS -I../src/include %{l_cppflags}"
+      LDFLAGS="%{l_ldflags}"
+      OBJS="pgconnection.o pgdatabase.o pgtransdb.o pgcursordb.o pglobject.o"
+      for o in $OBJS; do
+          $CXX $CFLAGS $CPPFLAGS $LDFLAGS -c -o $o `echo $o | sed -e 's;\.o$;.cc;'`
+      done
+      rm -f libpq++.a
+      ar rc libpq++.a $OBJS
+    ) || exit $?
+    ln -s `pwd`/src/interfaces/libpq/*.h src/include/
+    ( cd libpqxx-%{V_libpqxx}
+      %{l_shtool} subst \
+          -e 's;\(cut\)\( .*/configitems\)\( -f [0-9]\);\1\3\2;g' \
+          configure
+      ( echo "#!/bin/sh"
+        echo "case \"\$1\" in"
+        echo "   --includedir ) echo \"`pwd`/../src/include\" ;;"
+        echo "   --libdir     ) echo \"`pwd`/../src/interfaces/libpq\" ;;"
+        echo "esac"
+      ) >pg_config
+      chmod a+x pg_config
+      export PG_CONFIG=`pwd`/pg_config
+      export CC="%{l_cc}"
+      export CXX="%{l_cxx}"
+      export CFLAGS="%{l_cflags -O}"
+      export CXXFLAGS="%{l_cxxflags -O}"
+      export CPPFLAGS="-I`pwd`/../src/include %{l_cppflags}"
+      export LDFLAGS="%{l_ldflags}"
+      export LIBS="-lssl -lcrypto -lcrypt"
+      ./configure \
+          --disable-shared
+      %{l_make} %{l_mflags -O}
+    ) || exit $?
+%endif
+
+    #   build Perl bindings
+%if "%{with_perl}" == "yes"
+    %{l_prefix}/bin/perl-openpkg prepare
+    ( cd Pg-%{V_pgperl}
+      export POSTGRES_INCLUDE=dummy
+      export POSTGRES_LIB=dummy
+      %{l_shtool} subst \
+          -e 's;-I$POSTGRES_INCLUDE;-I../src/interfaces/libpq -I../src/include;' \
+          -e 's;-L$POSTGRES_LIB;-L../src/interfaces/libpq;' \
+          -e 's;-lpq;-lpq %{l_ldflags} -lssl -lcrypto -lcrypt;' \
+          Makefile.PL
+    ) || exit $?
+    ( export POSTGRES_INCLUDE=dummy
+      export POSTGRES_LIB=dummy
+      %{l_prefix}/bin/perl-openpkg -d Pg-%{V_pgperl} configure build
+    ) || exit $?
+%endif
+
+    #   build ODBC driver
+%if "%{with_odbc}" == "yes"
+    ( cd psqlodbc-%{V_psqlodbc}
+      export CC="%{l_cc}"
+      export CXX="%{l_cxx}"
+      export CFLAGS="%{l_cflags -O}"
+      export CXXFLAGS="%{l_cxxflags -O}"
+      export CPPFLAGS="-I`pwd`/../src/include"
+      CPPFLAGS="$CPPFLAGS -I`pwd`/../src/interfaces -I`pwd`/../src/interfaces/libpq"
+      CPPFLAGS="$CPPFLAGS %{l_cppflags}"
+      export LDFLAGS="-L`pwd`/../src/interfaces/libpq %{l_ldflags}"
+      ./configure \
+          --prefix=%{l_prefix} \
+          --with-unixodbc \
+          --with-odbcinst=%{l_prefix}/etc/unixodbc
+      %{l_make} %{l_mflags -O}
+    ) || exit $?
+%endif
+
+    #   build Slony-1 replication engine
+%if "%{with_slony1}" == "yes"
+    ( cd slony1-%{V_slony1}
+      %{l_shtool} subst \
+          -e 's;-lpq;-lpq -lssl -lcrypto -lcrypt;' \
+          src/slon/Makefile src/slonik/Makefile
+      export CC="%{l_cc}"
+      export CFLAGS="%{l_cflags -O}"
+      export CPPFLAGS="%{l_cppflags}"
+      ./configure \
+          --prefix=%{l_prefix} \
+          --with-pgsourcetree=`pwd`/..
+      %{l_make} %{l_mflags -O}
+    ) || exit $?
+%endif
+
+    #   build pgpool frontend
+%if "%{with_pgpool}" == "yes"
+    ( cd pgpool-%{V_pgpool}
+      export CC="%{l_cc}"
+      export CFLAGS="%{l_cflags -O} %{l_cppflags}"
+      export LDFLAGS="%{l_ldflags}"
+      export LIBS="-lgetopt"
+      ./configure \
+          --prefix=%{l_prefix} \
+          --sysconfdir=%{l_prefix}/etc/postgresql \
+          --with-pgsrc=/dummy
+      %{l_make} %{l_mflags}
+    ) || exit $?
+%endif
+
+%install
+    rm -rf $RPM_BUILD_ROOT
+
+    #   perform standard installation procedure
+    cp /dev/null register.txt
+    %{l_make} %{l_mflags} install DESTDIR=$RPM_BUILD_ROOT
+
+    #   strip down installation
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/doc
+    strip $RPM_BUILD_ROOT%{l_prefix}/bin/* >/dev/null 2>&1 || true
+    rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/pgaccess.1
+    rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/pgtclsh.1
+    rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/pgtksh.1
+
+    #   namespace adjustments to installation
+    for prog in \
+        createdb createlang createuser dropdb droplang clusterdb \
+        dropuser initdb ipcclean vacuumdb; do
+%if "%{with_compat}" == "yes"
+        cmd="ln"
+%else
+        cmd="mv"
+%endif
+        $cmd $RPM_BUILD_ROOT%{l_prefix}/bin/$prog \
+             $RPM_BUILD_ROOT%{l_prefix}/bin/pg_$prog
+        $cmd $RPM_BUILD_ROOT%{l_prefix}/man/man1/$prog.1 \
+             $RPM_BUILD_ROOT%{l_prefix}/man/man1/pg_$prog.1
+    done
+    ( cd $RPM_BUILD_ROOT%{l_prefix}/man/man7
+      for man in *.7; do
+          mv $man pg_$man
+      done
+    ) || exit $?
+
+    #   create additional directories
+    %{l_shtool} mkdir -f -p -m 755 \
+        $RPM_BUILD_ROOT%{l_prefix}/etc/postgresql \
+        $RPM_BUILD_ROOT%{l_prefix}/var/postgresql/db \
+        $RPM_BUILD_ROOT%{l_prefix}/var/postgresql/run
+
+    #   install migration utility
+%if "%{with_compat}" == "yes"
+    l_pguser="postgres"
+    l_pgpass="postgres"
+%else
+    l_pguser="postgresql"
+    l_pgpass="postgresql"
+%endif
+    %{l_shtool} install -c -m 755 %{l_value -s -a} \
+        -e "s;@l_pguser@;${l_pguser};g" \
+        -e "s;@l_pgpass@;${l_pgpass};g" \
+        %{SOURCE pg_migrate} \
+        $RPM_BUILD_ROOT%{l_prefix}/bin/
+
+    #   install C++ bindings (both old and new one)
+%if "%{with_cxx}" == "yes"
+    ( cd libpq++-%{V_libpqpp}
+      %{l_shtool} mkdir -f -p -m 755 \
+          $RPM_BUILD_ROOT%{l_prefix}/include/libpq++
+      %{l_shtool} install -c -m 644 \
+          libpq++.h pgconnection.h pgdatabase.h pgtransdb.h pgcursordb.h pglobject.h \
+          $RPM_BUILD_ROOT%{l_prefix}/include/libpq++/
+      %{l_shtool} install -c -m 644 \
+          libpq++.a \
+          $RPM_BUILD_ROOT%{l_prefix}/lib/
+    ) || exit $?
+    ( cd libpqxx-%{V_libpqxx}
+      %{l_shtool} mkdir -f -p -m 755 \
+          $RPM_BUILD_ROOT%{l_prefix}/include/pqxx
+      %{l_shtool} install -c -m 644 \
+          include/pqxx/*.h \
+          $RPM_BUILD_ROOT%{l_prefix}/include/pqxx/
+      %{l_shtool} install -c -m 644 \
+          src/.libs/libpqxx.a \
+          $RPM_BUILD_ROOT%{l_prefix}/lib/
+    ) || exit $?
+%endif
+
+    #   install Perl binding
+%if "%{with_perl}" == "yes"
+    ( export POSTGRES_INCLUDE=dummy
+      export POSTGRES_LIB=dummy
+      %{l_prefix}/bin/perl-openpkg -d Pg-%{V_pgperl} install
+    ) || exit $?
+    %{l_prefix}/bin/perl-openpkg -F perl-openpkg-files fixate cleanup
+%else
+    >perl-openpkg-files
+%endif
+
+    #   install ODBC driver
+%if "%{with_odbc}" == "yes"
+    ( cd psqlodbc-%{V_psqlodbc}
+      %{l_make} %{l_mflags} install AM_MAKEFLAGS="DESTDIR=$RPM_BUILD_ROOT"
+    ) || exit $?
+%endif
+
+    #   install Slony-1 replication engine
+%if "%{with_slony1}" == "yes"
+    ( cd slony1-%{V_slony1}
+      %{l_make} %{l_mflags} install DESTDIR=$RPM_BUILD_ROOT
+      rm -f $RPM_BUILD_ROOT%{l_prefix}/share/postgresql/slony1*v7[34].sql
+      rm -f $RPM_BUILD_ROOT%{l_prefix}/share/postgresql/xxid.v73.sql
+      mv $RPM_BUILD_ROOT%{l_prefix}/share/postgresql/xxid.v74.sql \
+         $RPM_BUILD_ROOT%{l_prefix}/share/postgresql/xxid.sql
+      ( echo "#   Slony-1 configuration for replication engine slon(1)"
+        echo "SLON_CLUSTER_NAME=\"example\""
+        echo "SLON_CONNECT_DBNAME=\"example\""
+        echo "SLON_CONNECT_USER=\"postgresql\""
+        echo "SLON_CONNECT_PASS=\"postgresql\""
+        echo "SLON_CONNECT_HOST=\"localhost\""
+        echo "SLON_SYNC_INTERVAL=\"10000\""
+        echo "SLON_SYNC_TIMEOUT=\"60000\""
+        echo "SLON_SYNC_GROUPSIZE=\"6\""
+        echo "SLON_SYNC_LOGLEVEL=\"1\""
+      ) >$RPM_BUILD_ROOT%{l_prefix}/etc/postgresql/slony1.conf
+    ) || exit $?
+%endif
+
+    #   install pgpool frontend
+%if "%{with_pgpool}" == "yes"
+    ( cd pgpool-%{V_pgpool}
+      %{l_shtool} install -c -s -m 755 \
+          pgpool $RPM_BUILD_ROOT%{l_prefix}/bin/
+      %{l_shtool} install -c -m 644 \
+          -e "s;\(socket_dir = \).*;\1'%{l_prefix}/var/postgresql/run';" \
+          -e "s;\(backend_socket_dir = \).*;\1'%{l_prefix}/var/postgresql/run';" \
+          -e "s;\(logdir = \).*;\1'%{l_prefix}/var/postgresql/run';" \
+          pgpool.conf.sample $RPM_BUILD_ROOT%{l_prefix}/etc/postgresql/pgpool.conf
+    ) || exit $?
+%endif
+
+    #   install run-command script
+    %{l_shtool} mkdir -f -p -m 755 \
+        $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
+    %{l_shtool} install -c -m 755 %{l_value -s -a} \
+        %{SOURCE rc.postgresql} \
+        $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/
+
+    #   optionally strip down to client-only installation
+%if "%{with_server}" != "yes"
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/bin/pg_[a-bd-z]*
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/bin/pg_c[a-np-z]*
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/bin/pg_controldata
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/bin/post*
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/man/man1/pg_[a-bd-z]*
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/man/man1/pg_c[a-np-z]*
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/man/man1/pg_controldata.1
+    rm -f  $RPM_BUILD_ROOT%{l_prefix}/man/man1/post*
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/include/postgresql/server
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/lib/postgresql
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/share/postgresql
+    rm -rf $RPM_BUILD_ROOT%{l_prefix}/var/postgresql
+%endif
+
+    #   determine installation files
+    %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
+%if "%{with_server}" == "yes"
+        %{l_files_std} `cat perl-openpkg-files` \
+        '%config %{l_prefix}/etc/postgresql/*' \
+        '%attr(700,%{l_rusr},%{l_rgrp}) %dir %{l_prefix}/var/postgresql/db' \
+        '%attr(755,%{l_rusr},%{l_rgrp}) %dir %{l_prefix}/var/postgresql/run' \
+        '%config %{l_prefix}/var/postgresql/db/*.conf'
+%else
+        %{l_files_std} `cat perl-openpkg-files`
+%endif
+
+%files -f files
+
+%clean
+    rm -rf $RPM_BUILD_ROOT
+
+%pre
+%if "%{with_server}" == "yes"
+    #   before upgrade, check migration dump, save status and stop service
+    [ $1 -eq 2 ] || exit 0
+    if [ -f $RPM_INSTALL_PREFIX/var/postgresql/db/PG_VERSION -a \
+         -f $RPM_INSTALL_PREFIX/bin/pg_migrate ]; then
+        #   database migration dumping hint
+        v_old_all=`cat $RPM_INSTALL_PREFIX/var/postgresql/db/PG_VERSION`
+        v_old_maj=`echo "$v_old_all" | sed -e 's/^\([0-9]*\.[0-9]*\).*/\1/'`
+        v_new_all="%{V_postgresql}"
+        v_new_maj=`echo "$v_new_all" | sed -e 's/^\([0-9]*\.[0-9]*\).*/\1/'`
+        if [ ".$v_old_maj" != ".$v_new_maj" ]; then
+           if [ ! -f $RPM_INSTALL_PREFIX/var/postgresql/db.dump.sql.bz2 -a ".$RPM_POSTGRESQL_MIGRATE" != .ignore ]; then
+                ( echo "You are upgrading from PostgreSQL $v_old_all to PostgresSQL $v_new_all,"
+                  echo "which is a major version change. We expect a database incompatibility,"
+                  echo "so we strongly recommend that you backup your existing database"
+                  echo "($RPM_INSTALL_PREFIX/var/postgresql/db/) first by running:"
+                  echo "    \$ $RPM_INSTALL_PREFIX/bin/pg_migrate dump"
+                  echo "If this fails for some reasons, try to dump your data manually:"
+                  echo "    \$ $RPM_INSTALL_PREFIX/bin/pg_dumpall -U postgresql -o | \\ "
+                  echo "      $RPM_INSTALL_PREFIX/lib/openpkg/bzip2 -9 \\ "
+                  echo "      >$RPM_INSTALL_PREFIX/var/postgresql/db.dump.sql.bz2"
+                  echo "Alternatively, if you want to force this package to be installed without"
+                  echo "performing a database dump, run the following command before upgrading:"
+                  echo "    \$ RPM_POSTGRESQL_MIGRATE=ignore; export RPM_POSTGRESQL_MIGRATE"
+                ) | %{l_rpmtool} msg -b -t error
+                exit 1
+            fi
+        fi
+    fi
+    eval `%{l_rc} postgresql status 2>/dev/null | tee %{l_tmpfile}`
+    %{l_rc} postgresql stop 2>/dev/null
+    exit 0
+%endif
+
+%post
+%if "%{with_server}" == "yes"
+    if [ $1 -eq 1 ]; then
+        #   create initial database
+%if "%{with_compat}" == "yes"
+        l_pguser="postgres"
+        l_pgpass="postgres"
+%else
+        l_pguser="postgresql"
+        l_pgpass="postgresql"
+%endif
+        su - %{l_rusr} -c \
+            "LC_CTYPE=C; export LC_CTYPE; umask 022; \
+            (echo $l_pguser; echo $l_pgpass) |\
+            $RPM_INSTALL_PREFIX/bin/pg_initdb \
+                -U $l_pguser -W -D $RPM_INSTALL_PREFIX/var/postgresql/db" 2>&1 |\
+        $RPM_INSTALL_PREFIX/lib/openpkg/shtool prop \
+            -p "Creating initial PostgreSQL DB in $RPM_INSTALL_PREFIX/var/postgresql/db"
+
+        #   adjust initial authentication configuration
+        cp $RPM_INSTALL_PREFIX/var/postgresql/db/pg_hba.conf \
+           $RPM_INSTALL_PREFIX/var/postgresql/db/pg_hba.conf.old
+        ( cat $RPM_INSTALL_PREFIX/var/postgresql/db/pg_hba.conf.old |\
+          sed -e 's;^\([^#]\);# \1;' -e 's;^$;#;'
+          echo ""
+          echo "#   OpenPKG PostgreSQL default access policy"
+          echo "local all all                           md5"
+          echo "host  all all 127.0.0.1 255.255.255.255 md5"
+          echo ""
+        ) >$RPM_INSTALL_PREFIX/var/postgresql/db/pg_hba.conf
+        rm -f $RPM_INSTALL_PREFIX/var/postgresql/db/pg_hba.conf.old
+
+        #   display information about next steps
+        ( echo "An initial PostgreSQL DB was created with the two standard"
+          echo "databases 'template0' and 'template1'. The owner of both"
+          echo "is the DB user '$l_pguser'. Its initial password is '$l_pgpass'."
+          echo "After starting PostgreSQL you should change this as soon as"
+          echo "possible with the following command:"
+          echo "\$ $RPM_INSTALL_PREFIX/bin/psql -U $l_pguser -d template1 \\"
+          echo "  -c \"ALTER USER $l_pguser WITH PASSWORD '<new-password>'\""
+        ) | %{l_rpmtool} msg -b -t notice
+
+        #   optionally link into unixODBC
+%if "%{with_odbc}" == "yes"
+        ( echo "[PostgreSQL]"
+          echo "Description     = PostgreSQL ODBC driver"
+          echo "Driver          = $RPM_INSTALL_PREFIX/lib/psqlodbc.so"
+          echo "Threading       = 2"
+        ) | $RPM_INSTALL_PREFIX/bin/odbcinst -i -d -r
+%endif
+    fi
+    if [ $1 -eq 2 ]; then
+        #   after upgrade, restore status
+        { eval `cat %{l_tmpfile}`; rm -f %{l_tmpfile}; true; } >/dev/null 2>&1
+        [ ".$postgresql_active" = .yes ] && %{l_rc} postgresql start
+        if [ -f $RPM_INSTALL_PREFIX/var/postgresql/db/PG_VERSION -a ".$PG_MIGRATE" != .ignore ]; then
+            #   database migration restoring hint
+            v_old_all=`cat $RPM_INSTALL_PREFIX/var/postgresql/db/PG_VERSION`
+            v_old_maj=`echo "$v_old_all" | sed -e 's/^\([0-9]*\.[0-9]*\).*/\1/'`
+            v_new_all="%{V_postgresql}"
+            v_new_maj=`echo "$v_new_all" | sed -e 's/^\([0-9]*\.[0-9]*\).*/\1/'`
+            if [ ".$v_old_maj" != ".$v_new_maj" ]; then
+                ( echo "You upgraded from PostgreSQL $v_old_all to PostgresSQL $v_new_all,"
+                  echo "which is a major version upgrade. We expect a database incompatibility,"
+                  echo "so we strongly recommend you to recreate the existing database under"
+                  echo "$RPM_INSTALL_PREFIX/var/postgresql/db/ by running the following command:"
+                  echo "    \$ $RPM_INSTALL_PREFIX/bin/pg_migrate restore"
+                  echo "If this fails for some reasons, try to restore your data manually:"
+                  echo "    \$ $RPM_INSTALL_PREFIX/lib/openpkg/bzip2 -d -c \\ "
+                  echo "      $RPM_INSTALL_PREFIX/var/postgresql/db.dump.sql.bz2 | \\ "
+                  echo "      $RPM_INSTALL_PREFIX/bin/psql -U postgresql -d template1"
+                ) | %{l_rpmtool} msg -b -t warn
+            fi
+        fi
+    fi
+    exit 0
+%endif
+
+%preun
+%if "%{with_server}" == "yes"
+    #   before erase, stop service and remove log files
+    [ $1 -eq 0 ] || exit 0
+    %{l_rc} postgresql stop 2>/dev/null
+    rm -f $RPM_INSTALL_PREFIX/var/postgresql/run/* >/dev/null 2>&1 || true
+    exit 0
+%endif
+

postgresql8/rc.postgresql

@@ -0,0 +1,102 @@
+#!@l_prefix@/lib/openpkg/bash @l_prefix@/etc/rc
+##
+##  rc.postgresql -- Run-Commands
+##
+
+%config
+    postgresql_enable="$openpkg_rc_def"
+    postgresql_flags=""
+    postgresql_datadir="@l_prefix@/var/postgresql/db"
+    postgresql_shut_mode="smart"
+    postgresql_socket_inet="127.0.0.1"
+    postgresql_socket_unix="@l_prefix@/var/postgresql/run/"
+    postgresql_log_prolog="true"
+    postgresql_log_epilog="true"
+    postgresql_log_numfiles="10"
+    postgresql_log_minsize="1M"
+    postgresql_log_complevel="9"
+    postgresql_slony1="no"
+    postgresql_pgpool="no"
+
+%common
+    postgresql_opts="-i -h $postgresql_socket_inet -k $postgresql_socket_unix"
+    postgresql_opts="$postgresql_opts $postgresql_flags"
+    postgresql_log_file="@l_prefix@/var/postgresql/run/postgresql.log"
+    postgresql_slony1_pidfile="@l_prefix@/var/postgresql/run/slon.pid"
+    postgresql_slony1_start () {
+        ( . @l_prefix@/etc/postgresql/slony1.conf
+          nohup @l_prefix@/bin/slon \
+              -d "$SLON_SYNC_LOGLEVEL" -g "$SLON_SYNC_GROUPSIZE" \
+              -s "$SLON_SYNC_INTERVAL" -t "$SLON_SYNC_TIMEOUT" \
+              "$SLON_CLUSTER_NAME" \
+              user="$SLON_CONNECT_USER" password="$SLON_CONNECT_PASS" \
+              dbname="$SLON_CONNECT_DBNAME" host="$SLON_CONNECT_HOST"
+              </dev/null >/dev/null 2>&1 &
+          echo $! >$postgresql_slony1_pidfile
+        ) >/dev/null 2>&1
+    }
+    postgresql_slony1_stop () {
+        if [ -f $postgresql_slony1_pidfile ]; then
+            kill -TERM `cat $postgresql_slony1_pidfile`
+            rm -f $postgresql_slony1_pidfile
+        fi
+    }
+
+%status -u @l_rusr@ -o
+    postgresql_usable="unknown"
+    postgresql_active="no"
+    rcService postgresql enable yes && \
+        @l_prefix@/bin/pg_ctl status -D $postgresql_datadir >/dev/null && postgresql_active="yes"
+    echo "postgresql_enable=\"$postgresql_enable\""
+    echo "postgresql_usable=\"$postgresql_usable\""
+    echo "postgresql_active=\"$postgresql_active\""
+
+%start -p 400 -u @l_rusr@
+    rcService postgresql enable yes || exit 0
+    rcService postgresql active yes && exit 0
+    @l_prefix@/bin/pg_ctl start -l $postgresql_log_file -D $postgresql_datadir -o "$postgresql_opts"
+    if rcVarIsYes postgresql_slony1; then
+        postgresql_slony1_start
+    fi
+    if rcVarIsYes postgresql_pgpool; then
+        @l_prefix@/bin/pgpool
+    fi
+
+%stop -p 400 -u @l_rusr@
+    rcService postgresql enable yes || exit 0
+    rcService postgresql active no  && exit 0
+    @l_prefix@/bin/pg_ctl stop -l $postgresql_log_file -D $postgresql_datadir -m $postgresql_shut_mode
+    if rcVarIsYes postgresql_slony1; then
+        postgresql_slony1_stop
+    fi
+    if rcVarIsYes postgresql_pgpool; then
+        @l_prefix@/bin/pgpool stop
+    fi
+
+%restart -p 400 -u @l_rusr@
+    rcService postgresql enable yes || exit 0
+    rcService postgresql active no  && exit 0
+    @l_prefix@/bin/pg_ctl restart -l $postgresql_log_file -D $postgresql_datadir -o "$postgresql_opts" -m $postgresql_shut_mode
+    if rcVarIsYes postgresql_slony1; then
+        postgresql_slony1_stop
+        postgresql_slony1_start
+    fi
+    if rcVarIsYes postgresql_pgpool; then
+        @l_prefix@/bin/pgpool stop
+        @l_prefix@/bin/pgpool
+    fi
+
+%reload -p 400 -u @l_rusr@
+    rcService postgresql enable yes || exit 0
+    rcService postgresql active no  && exit 0
+    @l_prefix@/bin/pg_ctl reload -D $postgresql_datadir
+
+%daily -u @l_rusr@
+    rcService postgresql enable yes || exit 0
+    shtool rotate -f \
+        -n ${postgresql_log_numfiles} -s ${postgresql_log_minsize} -d -c \
+        -z ${postgresql_log_complevel} -m 600 -o @l_rusr@ -g @l_rgrp@ \
+        -P "$postgresql_log_prolog" \
+        -E "$postgresql_log_epilog" \
+        $postgresql_log_file
+