##
##  openser.spec -- OpenPKG RPM Package Specification
##  Copyright (c) 2000-2007 OpenPKG Foundation e.V. <http://openpkg.net/>
##  Copyright (c) 2000-2007 Ralf S. Engelschall <http://engelschall.com/>
##
##  Permission to use, copy, modify, and distribute this software for
##  any purpose with or without fee is hereby granted, provided that
##  the above copyright notice and this permission notice appear in all
##  copies.
##
##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
##  SUCH DAMAGE.
##

#   package options
%define       V_openser  1.2.2
%define       V_rtpproxy 20071129-021701

#   package information
Name:         openser
Summary:      Open SIP Express Router
URL:          http://openser.org/
Vendor:       FhG FOKUS
Packager:     OpenPKG Foundation e.V.
Distribution: OpenPKG Community
Class:        PLUS
Group:        VoIP
License:      GPL
Version:      %{V_openser}
Release:      20071129

#   package options
%option       with_fsl  yes
%option       with_ssl  no

#   list of sources
Source0:      http://openser.org/pub/openser/%{version}/src/openser-%{V_openser}-tls_src.tar.gz
Source1:      http://openser.org/downloads/snapshots/rtpproxy/rtpproxy-cvs-%{V_rtpproxy}.tgz
Source2:      rc.openser
Source3:      fsl.openser
Source4:      openser.cfg
Source5:      openser.schema-dbtext.txt
Patch0:       openser.patch

#   build information
Prefix:       %{l_prefix}
BuildRoot:    %{l_buildroot}
BuildPreReq:  OpenPKG, openpkg >= 20060823, make, gcc, flex, bison, sed
PreReq:       OpenPKG, openpkg >= 20060823
%if "%{with_fsl}" == "yes"
BuildPreReq:  fsl
PreReq:       fsl
%endif
%if "%{with_ssl}" == "yes"
BuildPreReq:  openssl
PreReq:       openssl
%endif
AutoReq:      no
AutoReqProv:  no

%description
    OpenSER is a project spawned from FhG FOKUS SIP Express Router
    (SER). It provides SIP (RFC3621) registrar, proxy and routing
    functionality. A C shell like scripting language provides full
    control over the server's behaviour. It's modular architecture
    allows only required functionality to be loaded.

%track
    prog openser = {
        version   = %{V_openser}
        url       = http://openser.org/pub/openser/
        regex     = (\d+\.\d+\.\d+)/
        url       = http://openser.org/pub/openser/__NEWVER__/src/
        regex     = openser-(__VER__)-tls_src\.tar\.gz
    }
    prog openser:rtpproxy = {
        version   = %{V_rtpproxy}
        url       = http://openser.org/downloads/snapshots/rtpproxy/
        regex     = rtpproxy-cvs-(__VER__)\.tgz
    }

%prep
    %setup -q -n openser-%{version}-tls
    %setup -q -n openser-%{version}-tls -T -D -a 1
    %patch -p0

%build
    #   build dependencies
    %{l_make} %{l_mflags} \
        CC="%{l_cc}" \
%if "%{with_ssl}" == "yes"
        TLS=1 \
%endif
        prefix=%{l_prefix} \
        dep >/dev/null 2>&1 || true

    #   build program
    %{l_make} %{l_mflags} \
        CC="%{l_cc}" \
%if "%{with_ssl}" == "yes"
        TLS=1 \
%endif
        prefix=%{l_prefix}

    #   build modules
    %{l_make} %{l_mflags} \
        CC="%{l_cc}" \
%if "%{with_ssl}" == "yes"
        TLS=1 \
%endif
        prefix=%{l_prefix} \
        modules \
        skip_modules="mysql jabber"

    #   build rtpproxy extension
    ( cd rtpproxy
      export CC="%{l_cc}"
      export CFLAGS="%{l_cflags -O}"
      export LIBS=""
      case "%{l_platform -t}" in
          *-sunos* ) LIBS="$LIBS -lsocket -lnsl -lrt" ;;
      esac
      ./configure
      %{l_make} %{l_mflags}
    ) || exit $?

%install
    rm -rf $RPM_BUILD_ROOT

    #   install program
    %{l_make} %{l_mflags} \
        INSTALL="%{l_shtool} install%{l_nil} -c" \
        basedir=$RPM_BUILD_ROOT \
        prefix=%{l_prefix} \
        cfg-prefix=$RPM_BUILD_ROOT \
        cfg-target=%{l_prefix}/etc/openser/ \
        doc-dir=share/openser/doc/ \
        man-dir=man/ \
        install

    #   install modules
    %{l_make} %{l_mflags} \
        INSTALL="%{l_shtool} install%{l_nil} -c" \
        basedir=$RPM_BUILD_ROOT \
        prefix=%{l_prefix} \
        cfg-prefix=$RPM_BUILD_ROOT \
        cfg-target=%{l_prefix}/etc/openser/ \
        doc-dir=share/openser/doc/ \
        man-dir=man/ \
        install-modules \
        skip_modules="mysql jabber"

    #   install rtpproxy extension
    %{l_shtool} install -c -s -m 755 \
        rtpproxy/rtpproxy $RPM_BUILD_ROOT%{l_prefix}/sbin/openser_rtpproxy

    #   strip down installation
    strip $RPM_BUILD_ROOT%{l_prefix}/sbin/* >/dev/null 2>&1 || true
    rm -f $RPM_BUILD_ROOT%{l_prefix}/sbin/openser_mysql.sh

    #   post-adjust installation
    %{l_shtool} subst \
        -e 's;/etc/ser/.openserctlrc;%{l_prefix}/etc/openser/openserctlrc;g' \
        -e 's;\(PID_FILE\)=.*;\1=%{l_prefix}/var/openser/openser.pid;' \
        -e 's;\(SER_FIFO\)=.*;\1=%{l_prefix}/var/openser/openser.fifo;' \
        $RPM_BUILD_ROOT%{l_prefix}/sbin/openserctl

    #   install default configuration
    %{l_shtool} mkdir -f -p -m 755 \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openser
    %{l_shtool} install -c -m 755 %{l_value -s -a} \
        %{SOURCE openser.cfg} \
        $RPM_BUILD_ROOT%{l_prefix}/etc/openser/

    #   install OSSP fsl configuration
    %{l_shtool} mkdir -f -p -m 755 \
        $RPM_BUILD_ROOT%{l_prefix}/etc/fsl
    %{l_shtool} install -c -m 644 %{l_value -s -a} \
        %{SOURCE fsl.openser} \
        $RPM_BUILD_ROOT%{l_prefix}/etc/fsl/

    #   install run-command script
    %{l_shtool} mkdir -f -p -m 755 \
        $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
    %{l_shtool} install -c -m 755 %{l_value -s -a} \
        %{SOURCE rc.openser} \
        $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/

    #   create database directory and install database schema definitions
    %{l_shtool} mkdir -f -p -m 755 \
        $RPM_BUILD_ROOT%{l_prefix}/var/openser
    %{l_shtool} install -c -m 644 \
        %{SOURCE openser.schema-dbtext.txt} \
        $RPM_BUILD_ROOT%{l_prefix}/share/openser/

    #   determine installation files
    %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
        %{l_files_std} \
        '%config %{l_prefix}/etc/fsl/*' \
        '%config %{l_prefix}/etc/openser/*' \
        '%doc %{l_prefix}/share/openser/doc/*' \
        '%attr(-,%{l_rusr},%{l_rgrp}) %{l_prefix}/var/openser'

%files -f files

%clean
    rm -rf $RPM_BUILD_ROOT

%post
    #   on install, setup database
    if [ ! -d $RPM_INSTALL_PREFIX/var/openser/db ]; then
        mkdir $RPM_INSTALL_PREFIX/var/openser/db
        chown %{l_rusr}:%{l_rgrp} $RPM_INSTALL_PREFIX/var/openser/db
        chmod 755 $RPM_INSTALL_PREFIX/var/openser/db
        schema="$RPM_INSTALL_PREFIX/share/openser/openser.schema-dbtext.txt"
        for table in `sed -e '/^#.*/d' -e '/^$/d' -e 's;\([^:]*\):.*;\1;' <$schema | sort -u`; do
            grep "^${table}:" $schema | sed -e "s;^${table}: *;;" \
                >$RPM_INSTALL_PREFIX/var/openser/db/$table
        done
        chown %{l_rusr}:%{l_rgrp} $RPM_INSTALL_PREFIX/var/openser/db/* 2>/dev/null || true
        chmod 644 $RPM_INSTALL_PREFIX/var/openser/db/* 2>/dev/null || true
    fi

    #   after upgrade, restart service
    [ $1 -eq 2 ] || exit 0
    eval `%{l_rc} openser status 2>/dev/null`
    [ ".$openser_active" = .yes ] && %{l_rc} openser restart
    exit 0

%preun
    #   before erase, stop service and remove log files
    [ $1 -eq 0 ] || exit 0
    %{l_rc} openser stop 2>/dev/null
    rm -rf $RPM_INSTALL_PREFIX/var/openser/db 2>/dev/null || true
    rm -f  $RPM_INSTALL_PREFIX/var/openser/*  2>/dev/null || true
    exit 0