##
##  zebra.spec -- OpenPKG RPM Specification
##  Copyright (c) 2000-2001 Cable & Wireless Deutschland GmbH
##  Copyright (c) 2000-2001 Ralf S. Engelschall <rse@engelschall.com>
##
##  Permission to use, copy, modify, and distribute this software for
##  any purpose with or without fee is hereby granted, provided that
##  the above copyright notice and this permission notice appear in all
##  copies.
##
##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
##  SUCH DAMAGE. 
##  

#   package information
Name:         zebra
Summary:      Internet Routing Daemon
URL:          http://www.zebra.org/
Vendor:       Kunihiro Ishiguro
Packager:     The OpenPKG Project
Distribution: OpenPKG [EXP]
Group:        Net
License:      GPL
Version:      0.92a
Release:      %{l_branch}.0

#   list of sources
Source0:      ftp://ftp.zebra.org/pub/zebra/zebra-%{version}.tar.gz
Source1:      rc.zebra
Source2:      bgpd.conf  
Source3:      ospfd.conf
Source4:      ripd.conf  
Source5:      zebra.conf 

#   build information
Prefix:       %{l_prefix}
BuildRoot:    %{l_buildroot}
BuildPreReq:  OpenPKG, openpkg >= 20011023.0
PreReq:       OpenPKG, openpkg >= 20011023.0
AutoReq:      no
AutoReqProv:  no

%description
    GNU Zebra is free software (distributed under GNU Generic Public
    License) that manages TCP/IP based routing protocols. It supports
    BGP-4 protocol as described in RFC1771 (A Border Gateway Protocol
    4) as well as RIPv1, RIPv2 and OSPFv2. Unlike traditional, Gated
    based, monolithic architectures and even the so-called "new modular
    architectures" that remove the burden of processing routing
    functions from the CPU and utilize special ASIC chips instead, Zebra
    software offers true modularity.

%prep
    %setup -q 

%build
    #   patch configure script for correct pid directory
    %{l_rpmtool} subst \
        's;^ac_piddir=\$ZEBRA_PID_DIR;ac_piddir=%{l_prefix}/var/zebra;' \
        -- configure

    #   configure package
    CC="%{l_cc}" \
    CFLAGS="%{l_cflags -O}" \
    ./configure \
        --prefix=%{l_prefix} \
        --sysconfdir=%{l_prefix}/etc/zebra \
        --disable-ipv6 

    #   build package
    %{l_make} %{l_mflags -O}

%install
    rm -rf $RPM_BUILD_ROOT

    #   install package
    %{l_make} %{l_mflags} install AM_MAKEFLAGS="DESTDIR=$RPM_BUILD_ROOT"

    #   strip down package
    rm -f $RPM_BUILD_ROOT%{l_prefix}/man/man1/vtysh.1
    rm -f $RPM_BUILD_ROOT%{l_prefix}/info/dir
    strip $RPM_BUILD_ROOT%{l_prefix}/sbin/* >/dev/null 2>&1 || true

    #   replace default configuration
    rm -f $RPM_BUILD_ROOT%{l_prefix}/etc/zebra/*
    %{l_shtool} install -c -m 600 -e 's;@l_prefix@;%{l_prefix};g' \
        %{SOURCE bgpd.conf} $RPM_BUILD_ROOT%{l_prefix}/etc/zebra/
    %{l_shtool} install -c -m 600 -e 's;@l_prefix@;%{l_prefix};g' \
        %{SOURCE ospfd.conf} $RPM_BUILD_ROOT%{l_prefix}/etc/zebra/
    %{l_shtool} install -c -m 600 -e 's;@l_prefix@;%{l_prefix};g' \
        %{SOURCE ripd.conf} $RPM_BUILD_ROOT%{l_prefix}/etc/zebra/
    %{l_shtool} install -c -m 600 -e 's;@l_prefix@;%{l_prefix};g' \
        %{SOURCE zebra.conf} $RPM_BUILD_ROOT%{l_prefix}/etc/zebra/

    #   install run-command script
    %{l_shtool} mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d
    %{l_shtool} install -c -m 755 -e 's;@l_prefix@;%{l_prefix};g' \
        %{SOURCE rc.zebra} $RPM_BUILD_ROOT%{l_prefix}/etc/rc.d/

    #   make sure pid and log directory exists
    %{l_shtool} mkdir -f -p -m 755 $RPM_BUILD_ROOT%{l_prefix}/var/zebra

    #   determine package file list
    %{l_rpmtool} files -v -ofiles -r$RPM_BUILD_ROOT \
        %{l_files_std} \
        '%config %{l_prefix}/etc/zebra/*'

%files -f files

%clean
    rm -rf $RPM_BUILD_ROOT

%preun
    if [ $1 -eq 0 ]; then
        $RPM_INSTALL_PREFIX/etc/rc zebra stop
        rm -f $RPM_INSTALL_PREFIX/var/zebra/*.log
        rm -f $RPM_INSTALL_PREFIX/var/zebra/*.pid
    fi