##
##  gcc31.spec -- OpenPKG RPM Specification
##  Copyright (c) 2000-2002 Cable & Wireless Deutschland GmbH
##  Copyright (c) 2000-2002 The OpenPKG Project <http://www.openpkg.org/>
##  Copyright (c) 2000-2002 Ralf S. Engelschall <rse@engelschall.com>
##
##  Permission to use, copy, modify, and distribute this software for
##  any purpose with or without fee is hereby granted, provided that
##  the above copyright notice and this permission notice appear in all
##  copies.
##
##  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
##  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
##  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
##  IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
##  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
##  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
##  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
##  USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
##  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
##  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
##  OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
##  SUCH DAMAGE. 
##  

#   the version informations
%define       V_major  3.1
%define       V_snap_Y 2002
%define       V_snap_M 03
%define       V_snap_D 11

#   derived version shortcuts
%define       V_here   %{V_major}s%{V_snap_Y}%{V_snap_M}%{V_snap_D}
%define       V_dir    %{V_snap_Y}-%{V_snap_M}-%{V_snap_D}
%define       V_file   %{V_snap_Y}%{V_snap_M}%{V_snap_D}

#   package information
Name:         gcc31
Summary:      Forthcoming GNU C/C++ Compiler (3.1)
URL:          http://gcc.gnu.org/
Vendor:       Free Software Foundation
Packager:     The OpenPKG Project
Distribution: OpenPKG [EXP]
Group:        Language
License:      GPL
Version:      %{V_here}
Release:      20020313

#   list of sources
Source0:      ftp://gcc.gnu.org/pub/gcc/snapshots/%{V_dir}/gcc-%{V_file}.tar.bz2

#   build information
Prefix:       %{l_prefix}
BuildRoot:    %{l_buildroot}
BuildPreReq:  OpenPKG, openpkg >= 20020206, make
PreReq:       OpenPKG, openpkg >= 20020206
AutoReq:      no
AutoReqProv:  no

%description
    The GNU Compiler Collection (GCC) provides a standard conforming
    and highly portable ISO C and ISO C++ compiler. This is a SNAPSHOT
    version of the forthcoming GCC 3.1. Do not use it in a production
    environment!

%prep
    %setup -q -n gcc-%{V_file}

%build
    #   configure the package
    mkdir obj
    cd obj
    options=""
    case "%{l_target}" in
       *-linux* | *-freebsd* ) options="--with-gnu-as --with-gnu-ld" ;;
    esac
    CC="%{l_cc}" \
    CFLAGS="%{l_cflags}" \
    ../configure \
        --prefix=%{l_prefix} \
        --exec-prefix=%{l_prefix} \
        --with-gxx-include-dir=%{l_prefix}/include/g++31 \
        --with-local-prefix=%{l_prefix}/lib/gcc31-lib \
        --enable-languages="c,c++" \
        --enable-threads \
        --disable-maintainer-mode \
        --disable-shared \
        --disable-nls \
        $options

    #   build the package
    %{l_make} %{l_mflags} \
        MAKE="%{l_make} %{l_mflags}" \
        CFLAGS='-O' \
        LIBCFLAGS='-g -O2' \
        LIBCXXFLAGS='-g -O2 -fno-implicit-templates' \
        bootstrap-lean

%install
    rm -rf $RPM_BUILD_ROOT
    triple=`./config.guess`
    triple=`./config.sub $triple | sed -e 's;-unknown-;--;'`
    cd obj

    #   redirect to temporary build root
    %{l_shtool} subst -v -s \
        -e "s;^\\(prefix[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix};" \
        -e "s;^\\(exec_prefix[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix};" \
        -e "s;^\\(gcc_gxx_include_dir[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix}/include/g++31;" \
        -e "s;^\\(gxx_include_dir[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix}/include/g++31;" \
        -e "s;^\\(glibcppinstalldir[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix}/include/g++31;" \
        -e "s;^\\(local_prefix[ 	]*=\\).*;\\1 $RPM_BUILD_ROOT%{l_prefix}/lib/gcc31-lib;" \
        `find . -name Makefile -type f -print`

    #   make sure the install procedure doesn't compile anything
    #   (or else we would have wrong paths hard-coded in the programs)
    %{l_shtool} subst -v -s \
        -e 's;^install-cpp:.*;install-cpp:;' \
        -e 's;^install-common:.*;install-common: installdirs lang.install-common;' \
        -e 's;^install-driver:.*;install-driver:;' \
        -e 's;^install-libgcc:.*;install-libgcc: installdirs;' \
        -e 's;^install-build:.*;install-build:;' \
        -e 's;^install-collect2:.*;install-collect2: installdirs;' \
        -e 's;^install-assert-h:.*;install-assert-h: installdirs;' \
        -e 's;^install: stmp-dirs ./libgcc.a;install: stmp-dirs;' \
        -e 's;^\(install-.*:.*\) all *\(.*\)$;\1\2;' \
        gcc/Makefile gcc/libgcc.mk gcc/*/Makefile

    #   make sure the Makefiles are not re-generated
    for file in `find . -name config.status -print`; do
        ( echo "#!/bin/sh"
          echo ":"
        ) >$file
    done

    #   run the standard installation procedure
    %{l_make} %{l_mflags} install

    #   strip the installation
    mv $RPM_BUILD_ROOT%{l_prefix}/$triple/include/* \
       $RPM_BUILD_ROOT%{l_prefix}/lib/gcc31-lib/$triple/%{V_major}/include/ >/dev/null 2>&1 || true
    rm -rf $RPM_BUILD_ROOT%{l_prefix}/$triple
    rm -f $RPM_BUILD_ROOT%{l_prefix}/lib/*.la
    rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/*-gcc
    rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/*-c++
    rm -f $RPM_BUILD_ROOT%{l_prefix}/bin/*-g++
    strip $RPM_BUILD_ROOT%{l_prefix}/bin/* >/dev/null 2>&1 || true
    for prog in cc1 cc1plus collect2 cpp; do
        strip $RPM_BUILD_ROOT%{l_prefix}/lib/gcc31-lib/$triple/%{V_major}/$prog >/dev/null 2>&1 || true
    done

    #   make additional links
    ln $RPM_BUILD_ROOT%{l_prefix}/bin/gcc $RPM_BUILD_ROOT%{l_prefix}/bin/cc
    #ln $RPM_BUILD_ROOT%{l_prefix}/man/man1/gcc.1 $RPM_BUILD_ROOT%{l_prefix}/man/man1/cc.1
    ln $RPM_BUILD_ROOT%{l_prefix}/man/man1/g++.1 $RPM_BUILD_ROOT%{l_prefix}/man/man1/c++.1

    #   rename files
    ( cd $RPM_BUILD_ROOT%{l_prefix}/bin
      for file in *; do
          mv ${file} ${file}31
      done
    )
    ( cd $RPM_BUILD_ROOT%{l_prefix}/lib
      for file in *; do
          mv ${file} `echo ${file} | sed -e 's;^\([^.]*\)\(\..*\)$;\131\2;'`
      done
    )
    ( cd $RPM_BUILD_ROOT%{l_prefix}/man/man1
      for file in *; do
          mv ${file} `echo ${file} | sed -e 's;^\([^.]*\)\(\..*\)$;\131\2;'`
      done
    )

    #   create file list
    %{l_rpmtool} files -v -o$RPM_BUILD_DIR/gcc-%{V_file}/files -r$RPM_BUILD_ROOT %{l_files_std}

%files -f files

%clean
    rm -rf $RPM_BUILD_ROOT