|
00DEV
|
Cleanup and switch to direct .src.rpm scanning now that it works in endless time after we applied the workaround.
|
24年前 |
|
a2ps
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
amd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
analog
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
antiword
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
apache
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
apg
|
upgrade to APG 2.0.0b1
|
24年前 |
|
autoconf
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
autogen
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
automake
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
axyftp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
bash
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
bc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
bind
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
binutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
bison
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
boxes
|
fix dependencies
|
24年前 |
|
bzip2
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
c2man
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
calc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
cftp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
cpio
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
curl
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
cvs
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
cvsweb
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
db
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
dcron
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
delegate
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
dhcpd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
diffutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
dmalloc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
docbook
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
emacs
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
epm
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
exim
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
fetchmail
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
figlet
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
file
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
fileutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
findutils
|
Fix installation procedure (determined by src2make)
|
24年前 |
|
flawfinder
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
flex
|
switch back to the release version
|
24年前 |
|
freetype
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gated
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gawk
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gcc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gettext
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ghostscript
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gimp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
glib
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
glimpse
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gnupg
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
graphviz
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
grep
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
grepmail
|
fixed group
|
24年前 |
|
groff
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gtk
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
guile
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gup
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
gzip
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
heise
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
hexer
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
htdig
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
html2latex
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
imagemagick
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
imapd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
imlib
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
indent
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
infozip
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
inn
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
instant
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
iozone
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ircd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ircii
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
iselect
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ispell
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
its4
|
fixed group
|
24年前 |
|
jitterbug
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
jpeg
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
kermit
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lame
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
less
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lftp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
libiconv
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
libpcap
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
libtool
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
libxml
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
libxslt
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
limo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
links
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lmtp2nntp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
logsurfer
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lrzsz
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lsof
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
lynx
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
m4
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
magicpoint
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mailgrep
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
majordomo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
make
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
minicom
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mirror
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mkgallery
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mkisofs
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mm
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mng
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mozilla
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mpack
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mpg123
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mtools
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mutt
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
myodbc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
mysql
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
nail
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
nano
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ncftp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ncurses
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
netcat
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
nmap
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
nntpcache
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ntp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
openjade
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
openldap
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
openpkg
|
fix bootstrap version
|
24年前 |
|
openssh
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
openssl
|
fix compilation
|
24年前 |
|
orbit
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
par
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
patch
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
pcre
|
Fix requirements (found by our src2make)
|
24年前 |
|
pdksh
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
perl
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
perl-gd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
perl-ssl
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
petidomo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
pgp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
php
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
pinfo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
png
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
portsentry
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
postfix
|
upgrade unstable version
|
24年前 |
|
prngd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
procmail
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
proftpd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
psutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
pth
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
pureftpd
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
python
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
qpopper
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
qt
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
rc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
rcs
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
recode
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
rfc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
rrdtool
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
rsync
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ruby
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
samba
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sasl
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
scanssh
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
screen
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sed
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sendmail
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sfio
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sgml
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sgmlfmt
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sharutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
shellutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
shiela
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
shtool
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
siege
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sitecopy
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
skey
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
slang
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
smtpfeed
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
snmp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
squid
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ssmtp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
str
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
strace
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
stunnel
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
suck
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
sudo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tar
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tcl
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tcpdump
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tcsh
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
termutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tetex
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
texinfo
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
textutils
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tiff
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
tin
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
txt2man
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
txt2pdf
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
txt2regex
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
units
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
unixodbc
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
ups
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
uucp
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
uudeview
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
vim
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
w3m
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
wget
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
whatmask
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
whois
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
wml
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
xdelta
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
xmake
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
xmame
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
xterm
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
zebra
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
zlib
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
zope
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
zsh
|
Hmmmm.... goodbye good thought out but in practice unusable %{l_branch} variable. We have to use a static value here (implies manual editing again), because else source and binary RPM filenames won't match if binary is built one or more days after the source was rolled.
|
24年前 |
|
00README
|
Initial revision
|
24年前 |
Dr. Ralf S. Engelschall
0b61cd6f52